Yes, we have dimensions available with balanced proportions and load-bearing, but all our collections can be made to measure. Contact us for any request based on a model.

Allow 6 to 8 weeks for manufacturing from our Workshop based in Biarritz.

Deliveries are organized every week from the Workshop, delivery and installation in France and abroad. It is imperative to check the goods upon delivery. No complaints will be accepted without specific reservations beforehand on the delivery note. It will also be necessary to take photos of the problem and send them to us within 24 hours at the latest.

For daily maintenance, a damp sponge or window cleaner on a soft cloth is sufficient. Avoid placing hot pans or dishes directly on the steel. Provide felt pads under decorative objects placed on it. Recommendation for oiling table legs with BLUNT oil. In the event of a small scratch, you can reduce it with a permanent black felt-tip pen that you pass into the scratch, then smooth out the excess with your finger or slightly damp cloth. Then, apply a little steel oil with a soft cloth. You can also fill in large scratches with a little BLUNT black patina. Maintenance and repair kit on request.

The trays are made of solid wood. Solid wood is a material that can work over time due to climatic variations, especially in winter. Some variations in shape or cracks are not inherent to the way but to the material. All our woods are treated in our workshop, it may happen that in the sapwood (light and dead part of the wood) small occupants persist. In this case, it is enough to apply a little Xylophène to remedy their presence. The latter do not present any risk for surrounding wood. No complaints can be accepted for this purpose. The wood is varnished for indoor use. Maintenance is simple, sponge or window product is sufficient.

Yes, we work with about a hundred dealers and many decorators. You can contact us directly for more information or ask your usual contacts to contact us for a project.

The Used Steel finish is a unique and authentic finish. It consists of accentuating the details, reflections and marks of the Steel during the manufacture of the furniture. This takes the form of gray undulations or even imprints of time which, once fixed, offer unique reflections visible to the naked eye and accentuate the brightness of the furniture.

These traces of life in the matter are worked, polished and therefore revealed. No claim can be accepted for this purpose.

The Dark Steel finish offers an appearance covered in roughness, traces of rolling mills in a uniform whole while retaining the appearance of the original steel.

Each steel sheet is different and may have rolling mill patterns, certain traces or roughnesses that differ from one steel to another. No claim can be accepted in this regard.

The COLOR finish offers a uniform lacquered finish in the color of your choice, matte or glossy. All of our COLOR parts are made in 2-layer powder coating to ensure resistance in case of outdoor use.

We work solid wood by hand and without mechanical constraints.

The wood is already cracked or will crack naturally. Wood is a material where imperfection is pleasant and invites us to preserve it and enhance it without altering the use of the furniture. It becomes a unique piece due to its shape, color, finish, knots, cracks, traces of time.

The thickness of the wood varies depending on availability, irregularity and the particularity of the piece. In the interior version, the thickness of the wood will vary between 45 and 65 mm. In the exterior version, the thickness can vary between 80 and 100 mm. The length and width of the pieces of wood are given approximately, there may be a small difference in dimensions.

Each piece may have varying patterns, solid wood cracks with temperature and humidity differences, exposure and climatic variations. No claim can be accepted in this regard if the change does not alter the use of the furniture.

Our woods are treated, however, in the event of micro perforations or wood dust, it will be necessary to apply a little xylophene to the area. This does not pose any danger to the surrounding woods, it is the presence of the sapwood, the soft part of the wood, which sometimes allows them to reappear.